 |
|
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Series: | S7-300 Front Connector | Application: | Industrial Connection |
|---|---|---|---|
| Connection Method: | Screw Terminals | Lead Time: | IN STOCK |
| Weight: | 137g | Warranty: | 12 Months |
| High Light: | profibus connector,plc communication cable |
||
6ES7392-1AM00-0AA0 Front connector 40 Pole S7-300 PLC Cables And Connectors
Overview
The front connector permits the simple and user-friendly connection of the sensors and actuators to the I/O modules.
Use of the front connector:
It comes in 20-pin and 40-pin variants.
The front connector is plugged onto the module and covered by the front door. When replacing a module, only the front connector is disconnected, the time-intensive replacement of all wires is not necessary. In order to avoid errors when replacing modules, the front connector is coded mechanically when first plugged in. Then, it only fits in to the modules of the same type. This avoids, for example, an AC 230 V input signal accidentally being plugged into the DC 24 V module.
In addition, the connectors have a "pre-engagement position". This is where the connector is snapped onto the module before electrical contact is made. The connector clamps onto the module and can then easily be wired ("third hand"). After the wiring work, the connector is inserted further so that it makes contact.
The front connector contains:
The 40-pin front connector also comes with a locking screw for attaching and loosening the connector when replacing the module.
The front connectors are available for the following connection methods:
| SIMATIC S7-300, Front connector with screw contacts, 40-pole | ||
| General information | ||
| Product type designation | Front connector | |
| Ambient conditions | ||
| Ambient temperature during operation | ||
| ● min. | 0 °C | |
| ● max. | 60 °C | |
| Ambient temperature during storage/transportation | ||
| ● min. | -40 °C | |
| ● max. | 70 °C | |
| Accessories | ||
| belongs to product | S7-300 | |
| Connection method | ||
| Connection I/O signals | ||
| ● Connection method | Screw terminals | |
| ● Number of lines per connection | 1; Or 2 cables up to 0.75 mm² (total) in a shared end sleeve | |
| Conductor cross-section in mm² | ||
| — Connectable cable cross-sections for massive cables, min. | 0.25 mm² | |
| — Connectable cable cross-sections for massive cables, min. | 0.75 mm² | |
| — Connectable cable cross-sections for flexible cables without end sleeve, min. | 0.25 mm² | |
| — Connectable cable cross-sections for flexible cables without end sleeve, max. | 0.75 mm² | |
| — Connectable cable cross-sections for flexible cables with end sleeve, min. | 0.25 mm² | |
| — Connectable cable cross-sections for flexible cables with end sleeve, max. | 0.75 mm² | |
| Conductor cross-section acc. to AWG | ||
| — Connectable cable cross-sections for massive cables, min. | 24 | |
| — Connectable cable cross-sections for massive cables, min. | 19 | |
| — Connectable cable cross-sections for flexible cables without end sleeve, min. | 24 | |
| — Connectable cable cross-sections for flexible cables without end sleeve, max. | 19 | |
| — Connectable cable cross-sections for flexible cables with end sleeve, min. | 24 | |
| — Connectable cable cross-sections for flexible cables with end sleeve, max. | 19 | |
| Wire end processing | ||
| — Stripped length of cables, min. | 6 mm | |
| — Stripped length of cables, max. | 6 mm | |
| — End sleeve acc. to DIN 46228 without plastic sleeve | Design A, 5 mm to 7 mm long | |
| — End sleeve acc. to DIN 46228 with plastic sleeve | Design E, up to 6 mm long | |
| Mounting | ||
| — Tool | Screwdriver, conical design, 3 mm to 3.5 mm | |
| — Tightening torque, min. | 0.4 N·m | |
| — Tightening torque, max. | 0.7 N·m | |
| Dimensions | ||
| Width | 21.6 mm | |
| Height | 125 mm | |
| Depth | 40.9 mm | |
| Weights | ||
| Weight, approx. | 137 g | |
Contact Person: Richuang
Tel: +8618158331966
