 |
|
|
|
I'm Online Chat Now
Certification
Square Complementary Pnp Proximity Sensor , 50mm Waterproof Proximity Sensor
|
Product Details:
Payment & Shipping Terms:
|
Detailed Product Description
| Series: | NCN50 Inductive Sensor | Output Type: | PNP |
|---|---|---|---|
| Rated Operating Distance: | 50 Mm | Operating Voltage: | 10 To 60 V |
| Operating Current: | 0 To 200 MA | Mass: | 410 G |
| Highlight: | inductive proximity sensor,capacitive proximity sensor,Proximity Sensor Switch NCN50-FP-A2-P1 |
||
P+F NCN50 Series Proximity Sensor Switch PNP Complementary Sensor 50mm Proximity Switch
Application Specific Inductive Sensor features:
- Analog output models with 4-20 mA output signal
- Integrated speed monitor with up to 100 Hz operation
- Pressure resistant cylinder sensors for up to 500 bar
- Sensors approved for gas and dust Ex zones
- Models with stainless steel sensing face
- Protective class of up to IP68/ IP69k (submersible/ high pressure water jet resistant)
- Weld resistant designs with PTFE-coated surface
- Reduction factor of 1, all metals sensed at same distance
- Exclusive ferrous and non-ferrous detection models
- Safety function sensors
- Extended temperature range: -40 °C up to +250 °C
Datasheet Of NCN50-FP-A2-P1 Proximity Sensor Switch
| General specifications | ||
|---|---|---|
| Switching function | complementary | |
| Output type | PNP | |
| Rated operating distance | 50 mm | |
| Installation | non-flush | |
| Output polarity | DC | |
| Assured operating distance | 0 ... 40.5 mm | |
| Reduction factor rAl | 0.4 | |
| Reduction factor rCu | 0.3 | |
| Reduction factor r304 | 0.85 | |
| Output type | 4-wire | |
| Nominal ratings | ||
| Operating voltage | 10 ... 60 V | |
| Switching frequency | 0 ... 80 Hz | |
| Hysteresis | typ. 3 % | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | pulsing | |
| Voltage drop | ≤ 3 V | |
| Operating current | 0 ... 200 mA | |
| Off-state current | 0 ... 0.5 mA | |
| No-load supply current | ≤ 20 mA | |
| Time delay before availability | ≤ 300 ms | |
| Operating voltage indicator | LED, green | |
| Switching state indicator | LED, yellow | |
| Functional safety related parameters | ||
| MTTFd | 671 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
|
| Approvals and certificates | ||
| EAC conformity | TR CU 020/2011 | |
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | Certified by China Compulsory Certification (CCC) | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Mechanical specifications | ||
| Connection type | screw terminals | |
| Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
|
| Core cross-section | up to 2.5 mm2 | |
| Minimum core cross-section | without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm2 | |
| Maximum core cross-section | without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm2 | |
| Housing material | PBT | |
| Sensing face | PBT | |
| Housing base | PBT | |
| Degree of protection | IP68 | |
| Mass | 410 g | |
Contact Details
Yueqing Richuang Automation Equipment Co.,Ltd
Contact Person: Richuang
Tel: +8618158331966
Send your inquiry directly to us
More Proximity Sensor Switch
-
Tele XS530BLPAL2 Inductive Proximity Sensor Switch Standard Cylindrical Forms
-
Schneider Inductive Proximity Sensor , Discrete Inductive Proximity Switch
-
2 - Wire Fixed Proximity Sensor Switch For Chemical Environment Compliance
-
Hygienic Areas Capacitive Proximity Sensor / IP 68 Metal Proximity Sensor
-
Retro Reflective Position Proximity Sensor Switch With Visible Red Light
-
Long Range Through Beam Sensor , Electrical OT Photoelectric Proximity Sensor