|
Product Details:
Payment & Shipping Terms:
|
Application: | LOGO Power | Output Type: | Single |
---|---|---|---|
Output Voltage: | 24VDC | Power Supply Input: | 100-240 V AC |
Current: | 0.6 A, 1.3 A, 2.5 A And 4.0 A | Conditiopn: | New And Original |
High Light: | small switching power supply,switching power supply unit |
LOGO Power 24VDC SMPS Switch Mode Power Supply Power Types Of Power
Overview
LOGO!Power product family is ideally suited for low installation depths, such as in miniature distribution boards. The stabilized power supplies with a wide range input of 100 … 240 V AC (85 … 264 V) and 110 ... 300 V DC are available with an output voltage of 24 V in four performance classes. The 24 V versions are ideal for supplying LOGO! controllers with the corresponding voltage input. The high level of efficiency across the entire load range as well as the low no-load losses result in lower overall energy consumption. Greater convenience when commissioning and servicing thanks to integrated current monitor (for devices at least 36 mm wide) The extended temperature range from -25 °C to +70 °C enables a host of additional applications.
To further increase the 24 V availability, the LOGO!Power power supplies can be combined with DC UPS, redundancy and selectivity modules.
Article number |
6EP3330-6SB00-0AY0 |
6EP3331-6SB00-0AY0 |
6EP3332-6SB00-0AY0 |
6EP3333-6SB00-0AY0 |
|
---|---|---|---|---|---|
Product |
LOGO!Power |
LOGO!Power |
LOGO!Power |
LOGO!Power |
|
Power supply, type |
24 V/0.6 A |
24 V/1.3 A |
24 V/2.5 A |
24 V/4 A |
|
Input | |||||
Input | 1-phase AC or DC | 1-phase AC or DC | 1-phase AC or DC | 1-phase AC or DC | |
Rated voltage value Vin rated | 100 ... 240 V | 100 ... 240 V | 100 ... 240 V | 100 ... 240 V | |
Voltage range AC | 85 ... 264 V | 85 ... 264 V | 85 ... 264 V | 85 ... 264 V | |
Input voltage | |||||
|
110 ... 300 V | 110 ... 300 V | 110 ... 300 V | 110 ... 300 V | |
Wide-range input | Yes | Yes | Yes | Yes | |
Overvoltage resistance | 300 V AC for 1 s | 300 V AC for 1 s | 300 V AC for 1 s | 300 V AC for 1 s | |
Mains buffering at Iout rated, min. | 40 ms; at Vin = 187 V | 40 ms; at Vin = 187 V | 40 ms; at Vin = 187 V | 40 ms; at Vin = 187 V | |
Rated line frequency 1 | 50 Hz | 50 Hz | 50 Hz | 50 Hz | |
Rated line frequency 2 | 60 Hz | 60 Hz | 60 Hz | 60 Hz | |
Rated line range | 47 ... 63 Hz | 47 ... 63 Hz | 47 ... 63 Hz | 47 ... 63 Hz | |
Input current | |||||
|
0.3 A | 0.7 A | 1.22 A | 1.95 A | |
|
0.2 A | 0.35 A | 0.66 A | 0.97 A | |
Switch-on current limiting (+25 °C), max. | 20 A | 25 A | 52 A | 31 A | |
I²t, max. | 0.8 A²·s | 0.8 A²·s | 3 A²·s | 2.5 A²·s | |
Built-in incoming fuse | internal | internal | internal | internal | |
Protection in the mains power input (IEC 898) | Recommended miniature circuit breaker: from 6 A characteristic B or from 2 A characteristic C | Recommended miniature circuit breaker: from 6 A characteristic B or from 2 A characteristic C | Recommended miniature circuit breaker: from 10 A characteristic B or from 6 A characteristic C | Recommended miniature circuit breaker: from 10 A characteristic B or from 6 A characteristic C | |
Output | |||||
Output | Controlled, isolated DC voltage | Controlled, isolated DC voltage | Controlled, isolated DC voltage | Controlled, isolated DC voltage | |
Rated voltage Vout DC | 24 V | 24 V | 24 V | 24 V | |
Total tolerance, static ± | 3 % | 3 % | 3 % | 3 % | |
Static mains compensation, approx. | 0.1 % | 0.1 % | 0.1 % | 0.1 % | |
Static load balancing, approx. | 0.1 % | 0.1 % | 0.1 % | 0.1 % | |
Residual ripple peak-peak, max. | 200 mV | 200 mV | 200 mV | 200 mV | |
Residual ripple peak-peak, typ. | 30 mV | 30 mV | 30 mV | 30 mV | |
Spikes peak-peak, max. (bandwidth: 20 MHz) | 300 mV | 300 mV | 300 mV | 300 mV | |
Spikes peak-peak, typ. (bandwidth: 20 MHz) | 50 mV | 50 mV | 50 mV | 50 mV | |
Adjustment range | 22.2 ... 26.4 V | 22.2 ... 26.4 V | 22.2 ... 26.4 V | ||
Product function Output voltage adjustable | No | Yes | Yes | Yes | |
Contact Person: Richuang
Tel: +8618158331966